Diamond Cut CNC Alloy Wheel Lathe Machine is used to give the surface of broken or scratched rims a cleaner and brighter appearance. Thanks to automatic measurement and automatic cutting, you can easily and quickly renew old, scratched rims.

First step: Connect the rim to the machine. After connecting the rim to the machine, start the engine with the motor control on the screen and make sure that there is no balance and the rim does not hit anywhere. You can easily increase or decrease the speed of the engine on this screen. Alloy Wheel Lathe Machine uses a touch screen, so you can easily manage the machine. After checking the rim and making sure that it does not hit anywhere and is not balanced, go to the second step.

Second step: Measure the starting point. Bring the measuring probe to the starting point with the handwheel and press the Starting Point button on the screen.

Third step: To measure the ending point, bring the measuring probe to the ending point with the handwheel and press the Ending Point button. When the measuring probe touches the ending contact point, it will automatically record the ending point coordinates and move up on the z axis.

Fourth step: Measure between the starting and ending points. Before pressing the Intermediate Measurement button, determine how many mm intervals it will measure, how many mm it will rise after the measurement probe contact, and press the button. In this way, you are considered to have measured to visualize the coordinates between the start and end points.

Step five: Edit the measured and visualized coordinates. You can edit the coordinates visualized on the right of the screen to make them smoother. You can easily draw and extend the drawing. After finishing the drawing, you can get a smoother result by shifting the drawing points. There is also a library option on the drawing screen. You do not need to measure again by selecting a drawing from the files you have previously saved.

Step six: Click the Start Cutting button to start the cut. You can adjust the cutting speed, motor speed, and cutting depth from this screen. There are recommended values ​​in the sections where you will enter these settings on the screen.

After the sixth step is finished, if you do not find the cutting depth sufficient, you can automatically go to the starting point by clicking the Restart button.

If you wish, you can also cut starting from the opposite side of the rim. In this way, you will make a cut from the ending point to the starting point, not from the starting point to the ending point.

For safety, the cutting diamond goes up on the Z axis at the beginning and end of the cut. You can change these values ​​or cut with the recommended values. For more information, you can contact us here: https://eskonmakina.com/iletisim.html